Applications
Inbuilt Controller – All pumps between 3HP to 10HP are equipped with built-in protection against dry running, overload mechanical jamming etc. |
Impeller – Wear Resistant SS Impeller with wide passages that can can pass solid up to 25mm. |
Motor – Motor capable to withstand wide voltage fluctuations, Highly efficient dry motors with built-in protection against temperature rise. |
Shaft – Extra heavy duty SS Shaft not expossed to pumpage liquid. |
Efficiency Restoration System – Adjustable Neckring / Wear ring to restore efficiency. |
Mechanical Seals – Dual mechanical seal, independent of discharge pressure, thus providing improved seal life. |
Bearing – Heavy duty ball bearing used at top and bottom ends to balancer adverse load. |
Seal -Guard Protection: Additional protection for Mechanical Seal by seal guard. |
Cable Sealing – Special Leak proof cable sealing arrangement to avoid ingress of water through cable. No need to open motor for changing cable. |
Moduler Design – Option of pump portion interchangability in given rating as per head/Flow requirement. |
Cooling – Run-through cooling for better heat dissipation & low minimum submergence. |
Product Details:
Pressure | High |
Temperature | 150 |
Motor Phase | 3PHASE |
Number Of Stages | Single-stage Pump |
Capacity | 1250LPM |
Model | NON CLOG (6-10HP), CNC64M |
Brand | Cosmos |
Motor Horsepower | 5 - 20 HP |
Size | 4 INCHES |
Speed | 1250LPM |
Surface Finishing | 60MM |
Power Source | 3 PHASE |
Usage/Application | Cosmos Non-clog Series Mud Sand Dewatering Submersible Slurry Sewage Water Pumps |
Power | 6-10 HP, 4.5-7.5 |
Material | SS |
Max Flow Rate | 280-370 GPM |
Discharge Connection | 4 Inch |
Motor VFD rated | 2 Poles |
Power Cable length | 153 m |
Nitrile Rubber | Lined Wear plate |
Shaft | 431 Stainless Steel |
Hardware | 304 Stainless Steel |
Impeller | Nitride Hardened 410SS to 56HRC is Standard |
Volute | 304 Stainless Steel |
pH Range | 5 - 8 |
Power Supply | 230/380/460/575 V |
Max Shut off Head | 75-100 Feet |
Solid Handling | 2.5 Inch |
Impeller Type | Vortex |
Motor 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class 'H' (180??C).
??
Ball Bearings The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
??
Power Cable Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU.
??
Shaft Seal Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.
??
Corrosion Resistant Epoxy coated Extruded Aluminum Stator Casing.
??
Product Details:
Temperature | 150 |
Size | 4 inches |
Discharge Flow | 4 INCH |
Voltage | 240 |
Max Flow Rate | 20 GPM (76 LPM) to 1,800 GPM (6,814 LPM) |
Power (kw) | 6 HP |
Power Cord Length | 20 Meters |
Inlet Size | 4INCH |
Color | GREY/YELLOW |
Head | 20 Meter |
Brand | Cosmos |
Material | SS |
Phase Type | 3 PHASE |
Discharge Heads | 5' (1.5 M) to 80' (24 M) |
Power Rating | 2-20 HP |
Discharge Size | 2"(50 mm), 3"(75 mm), 4"(100 mm) and 6"(150 mm) |
Additional Information: